[1] O. C. Onar, S. L. Campbell, L. E. Seiber, C. P. White, and M. Chinthavali, “A high-power wireless charging system development and integration for a Toyota RAV4 electric vehicle,” in Proc. of Transportation Electrification Conf. & Expo, 2016, pp. 1-8.
[2] J. Kim, H. C. Son, D. H. Kim, and Y. J. Park, “Optimal design of a wireless power transfer system with multiple self-resonators for an LED TV,” IEEE Trans. on Consumer Electronics, vol. 58, no. 3, pp. 775-780, 2012. doi:  10.1109/TCE.2012.6311317
[3] A. Satyamoorthy, P. Riehl, H. Akram, et al., “Wireless power receiver for mobile devices supporting inductive and resonant operating modes,” in Proc. of IEEE Wireless Power Transfer Conf., 2015, pp. 52-55.
[4] S. Aldhaher, C. K. Luk, and J. F. Whidborne, “Tuning class E inverters applied in inductive links using saturable reactors,” IEEE Trans. on Power Electronics, vol. 29, no. 6, pp. 2969-2978, 2014. doi:  10.1109/TPEL.2013.2272764
[5] A. Alt, R. Quaglia, P. Chen, S. Alsahali, P. J. Tasker, and J. Lees, “Class B*—A new high efficiency RF DC/DC converter concept using second harmonic generation/injection,” in Proc. of IEEE Wireless Power Transfer Conf., 2018, pp. 1-4.
[6] S. H. Yoon, T. H. Kim, J. G. Yook, G. H. Yun, and W. Y. Lee, “High Q-factor WPT system with negative impedance converter,” in Proc. of Wireless Power Transfer Conf., 2017, pp. 1-4.
[7] A. P. Sample, D. A. Meyer, and J. R. Smith, “Analysis, experimental results, and range adaptation of magnetically coupled resonators for wireless power transfer,” IEEE Trans. on Industrial Electronics, vol. 58, no. 2, pp. 544-554, 2011. doi:  10.1109/TIE.2010.2046002
[8] T. Imura and Y. Hori, “Maximizing air gap and efficiency of magnetic resonant coupling for wireless power transfer using equivalent circuit and neumann formula,” IEEE Trans. on Industrial Electronics, vol. 58, no. 10, pp. 4746-4752, 2011. doi:  10.1109/TIE.2011.2112317
[9] W.-S. Zhou, S. Sandeep, P.-D. Wu, P. Yang, W.-W. Yu, and S.-Y. Huang, “A wideband strongly coupled magnetic resonance wireless power transfer system and its circuit analysis,” IEEE Microwave and Wireless Components Letters, pp. 99:1-3, Nov. 2018, DOI:  10.1109/LMWC.2018.2876767
[10] Z. Tong, M.-F. Fu, C.-B. Ma, and X.-N. Zhu, “Optimal load analysis for a two-receiver wireless power transfer system,” in Proc. of Wireless Power Transfer Conf., 2014, pp. 84-87.
[11] K. E. Koh, T. C. Beh, T. Imura, and Y. Hori, “Impedance matching and power division using impedance inverter for wireless power transfer via magnetic resonant coupling,” IEEE Trans. on Industry Applications, vol. 50, no. S3, pp. 2061-2070, 2014.
[12] A. Uchida, S. Shimokawa, and H. Oshima, “Effect of load dependence of efficiency in a multi-receiver WPT system,” in Proc. of Wireless Power Transfer Conf., 2017, pp. 1-4.
[13] J. H. Choi, S. K. Yeo, C. B. Park, S. Park, J. S. Lee, and G. H. Cho, “A resonant regulating rectifier (3R) operating at 6.78 MHz for a 6W wireless charger with 86% efficiency,” in Proc. of IEEE Intl. Solid-state Circuits Conf. Digest of Technical Papers, 2013, pp. 64-66.
[14] K. Lee, D. H. Cho, and W. P. Letters, “Analysis of wireless power transfer for adjustable power distribution among multiple receivers,” IEEE Antennas and Wireless Propagation Letters, vol. 14, pp. 950-953, Jan. 2015. doi:  10.1109/LAWP.2015.2388711
[15] F.-X. Liu, Y. Yong, Z. Ding, X.-L. Chen, and R. M. Kennel, “A multi-frequency superposition methodology to achieve high efficiency and targeted power distribution for a multiload MCR WPT system,” IEEE Trans. on Power Electronics, vol. 33, no. 10, pp. 9005-9016, 2018. doi:  10.1109/TPEL.2017.2784566
[16] L.-L. Zhang, Z.-G. Cui, W.-X. Li, and D.-L. Shi, “Research on multi-channel wireless power distribution switch,” in Proc. of Wireless Power Transfer Conf., 2017, pp. 1-4.